2024 Manac Lowbeds 35 Ton Extendable Mechanical Lowbed

Information

2024 Manac Lowbeds 35 Ton Extendable Mechanical Lowbed

Features may include:
  • Mechanical detachable gooseneck with fifth wheel guide rollers
  • Coupling guide and pin on gooseneck
  • Accesible connection plates with air and electrical
  • Variable coupler heights 48", 50'' and 52"
  • Integrated storage box between the mainbeams in the gooseneck

Photos

Highlights

  • Auburn, Washington
  • 2024
  • Manac
  • Lowbeds 35 Ton Extendable Mechanical Lowbed
  • Crossmembers: 80,000 psi, front I-beams 4" @ 3.64 lbs/ft, 80 000 psi on 14" c/c, main deck "C" shaped steel 1/4" thick 2 1/2" x 9 1/2" high on 24" c/c, and 2" x 4" height between crossmembers | Side Rail: Front and rear 3/8" plate. Fabricated H-beams 12" high 3/8" x 5", 100,000 psi steel with 3/16" web 80,000 psi with parachute holes
  • Available
  • 102" side rail to side rail
  • coupler: 48"-50"

Specifications

  • 2024
  • Manac
  • Lowbeds
  • 35 Ton Extendable Mechanical Lowbed
  • Lowboy
  • Openings: Every 3'-0" | Gooseneck: Mechanical detachable, beams 12" high, with 100,000 psi flanges, 84" clear behind king pin with manual gooseneck locks at 2 locations
  • 48'-0" closed with 29' main deck, 69'-0" open with 50' main deck
  • 102" side rail to side rail
  • Main deck, 8" under center beams, 22" above ground
  • coupler: 48"-50"
  • 16"
  • Crossmembers: 80,000 psi, front I-beams 4" @ 3.64 lbs/ft, 80 000 psi on 14" c/c, main deck "C" shaped steel 1/4" thick 2 1/2" x 9 1/2" high on 24" c/c, and 2" x 4" height between crossmembers | Side Rail: Front and rear 3/8" plate. Fabricated H-beams 12" high 3/8" x 5", 100,000 psi steel with 3/16" web 80,000 psi with parachute holes
  • Main System: Grote Ultra Blue LED sealed lights & wiring harness system meets Transport Canada and DOT requirements | | Front Plug: 7 way (SAE J560) at front and 7 way at deck level
  • LED shock proof lights with polycarbonate lenses
  • Fixed, Hendrickson (1) HT-250YS-9 and (1) HT-250US , tandem 54" spread
  • 16 1/2" standard, extended life lining
  • 10 stud disc, balanced drums, outboard mount
  • Wabco ABS 2S-1M
  • Oil or Grease
  • Continental 22.5 radial tires
  • Flanges: Main beams female 1/2" x 14" and male 3/4" x 8", rear beams 1/2" x 6" top and 3/4" x 6" bottom flanges all 100,000 psi steel | Outriggers: Attachment bushing only, qty: 30, 15 each side | Front End: 6" x 4" x 1/4" tubing | Bumper: 8" x 4" x 3/16" tubing, wide load sign support and warning strobe light support near 4-way rear connector and pin up joints for flip-up axle (bushings included) | Locks: Air operated with a third glad hand at front | Rollers:Qty of 6, 2 on female section of frames and 4 on male sections | Rear Connectors: 4 way and 7 way for flip-up axle option | Rims: Hub piloted steel, aluminum available | Mudflaps: Two sets rubber with Manac logo at rear of gooseneck and rear bumper | Paint: Shot blasted, one coat of epoxy primer and two acrylic polyurethane top coats | Decals: Conspicuity tape complies with DOT and CMVSS standards | Lashing Rings: 18 heavy-duty D-rings, 5 bent style each side of main deck and 2 at each side of front and rear | Storage Box: 1 between two beams of the gooseneck | Flags: 4 flags including 4 supports, 2 on rear rail gooseneck and 2 on rear bumper
  • Web: 1/4" 80,000 psi steel, female section 14" high, male 11 1/2" high and 15" high at rear | Floor: Apitong or equivalent, 1 1/8" thick, shiplap finished, no preservative, front and rear full width and open at center between main beams of main deck. Checker plate 3/16" above rear wheels and slope