Crossmembers: 4" I-beams | Bottom Rail: 9" high aluminum extrusion
Available
102''
Coupler: 47"-50" | Drop: 12''
Specifications
2024
Manac
Chip Vans
Robust Drop Frame
Dry Van
Rear Header: Steel formed 4"x4" x 3/16"
48'-53'
102''
Coupler: 47"-50" | Drop: 12''
36"-42" bolted
5/16" thick, reinforced, 100 000 psi steel
Crossmembers: 4" I-beams | Bottom Rail: 9" high aluminum extrusion
Fabricated "I" beam structure, 100 000 psi steel, full length with fenders over each axle flush with floor made of 11 gauge steel plates
Main System: Grote Ultra Blue LED sealed lights & wiring harness system meets Transport Canada and DOT requirements | Front Plug: 7 way (SAE J560) | Front Additional Plug: 7 way (ISO 3731) for auxiliary functions
LED shock proof lights with polycarbonate lenses | Back-up Lights: 2 sealed beam spot lights in rubber grommet in rear sill
Hendrickson HT or Intraax air ride | Bogie: Fixed 1/4" thick, 80 000psi steel, C-shaped with plug welded connections
16 1/2" x 7" extended life lining
10 stud disc, balanced drums, outboard mount
Wabco ABS 2S-1M
Oil or Grease
Continental 22.5 radial tires
Front Wall Insulation: 6 Post Design, Pre-painted aluminum with double sheeting aluminum corners, unpolished on the outside and aluminum plate inside | Interior Liner: 3/8" plywood with silicone sealed joints| Front Wall Insulation: 1 3/4" thick foam in front and 1" in the corners | Ladder: One ladder made of aluminum, road side front wall | Side Panels: .049" Prepainted White Aluminum Panels | Side Wall Insulation: 1 3/4" thick foam | Sample Door: One aluminum 10" x 14" installed road side | Vents: 4 openings 11" x 19" on each side wall with perforated aluminum plate | Door Frame: Galvanized (G164) | Bumper: Galvanized CMVSS & DOT approved with 4" x 4" roll formed tube cross bar with solid steel push bars | Tarp Support: 1/4" aluminum plate each of the unit for roll type tarp | Landing Gear: Holland 2 Speed | Dummy Legs: Skids made of aluminum extrusion 4" x 1 1/4"| Rims: Hub piloted steel, aluminum available | Mudflaps: Black rubber with Manac logo | Gladhands: Fixed at front | Decals: Conspicuity tape complies with DOT and CMVSS standards | Posts: Aluminum 45mm deep on 16" c/c full length
Insulation: 1 1/2" thick foam | liner: Prepainted white aluminum 0.049" thick | Doors: Single dump style, aluminum with door latch on door sill manually operated with a road side handle
Floor: 3/4" plywood covered with one coat linseed oil | Structure: Galvanized and reinforced
Open type | Bows: 3 galvanized steel, without offset and hinges
