Extruded heavy duty aluminum corner, including moose rubber bumper
Photos
Highlights
Auburn, Washington
2024
Manac
Flatbed Highway Aluminum Drop Deck
Crossmembers: 4" high extruded aluminum I beams, 16" c/c in gooseneck and the remaining 12" c/c. One additional crossmember at rear bumper | Side Rail: Aluminum extrusion 5 13/16" high with integrated cargo rail | Rub Rails: Aluminum extrusion 3/8" x 2 3/4" with standard double pipe spools | Knee Braces: 1/4" formed aluminum plates bolted to crossmember and web each side
Available
Drop: 20", located at 10'-6" from front | Coupler: 47"-50"
Specifications
2024
Manac
Flatbed Highway
Aluminum Drop Deck
Flatbed
28'-53'
96"-102"
Drop: 20", located at 10'-6" from front | Coupler: 47"-50"
59" at front and 41" at rear
18"
1/4" galvanized 80,000 psi steel bolted structure
Crossmembers: 4" high extruded aluminum I beams, 16" c/c in gooseneck and the remaining 12" c/c. One additional crossmember at rear bumper | Side Rail: Aluminum extrusion 5 13/16" high with integrated cargo rail | Rub Rails: Aluminum extrusion 3/8" x 2 3/4" with standard double pipe spools | Knee Braces: 1/4" formed aluminum plates bolted to crossmember and web each side
Main System: Grote Ultra Blue LED sealed lights & wiring harness system, meets Transport Canada and DOT requirements | Front Plug: 7 way (SAE J560)
LED shock proof lights with polycarbonate CLEAR lenses
Hendrickson Intraax air ride
16 1/2" x 7" extended life lining
10 stud disc, balanced drums, outboard mount
System: Wabco ABS 2S-1M
Oil or Grease
Continental 22.5 radial
Flanges: 3/8" x 5" 100,000 psi galvanized steel in gooseneck area and lower deck aluminum extrusion (6061-T6) | Pockets: Aluminum tube, 4" high on 24" centers with certified 5,500 lbs working load limit | | Sliding Track: Full length double "LL" extruded aluminum road side | Front End: Aluminum extrusion 7" high with bevelled corners | Rear End: Aluminum extrusion, 6 1/2" high, 16,000 lbs. lift truck HD capacity with 3 integrated boxes at rear. | Bumper: Bolt-on aluminum, Transport Canada and DOT certified | Fenders: Reinforcement over tires at rear | Landing Gear: Holland with galvanized reinforced support structure | Rims: Hub piloted steel, aluminum available | Mudflaps: Black rubber with Manac logo | Gladhands: Fixed at front | Decals: Conspicuity tape complies with DOT and CMVSS standards
Web: 3/16" plate in king pin area, 80 000 psi galvanized steel and remaining is 1/4" polished aluminum | Floor: High strength 1 1/4" high inverted "T" structural aluminum extrusion with 3 apitong nailers
