Utility Trailers of Washington

Specifications

• 2024 Manac Flatbed Highway Durable Steel Extendable Drop Deck
• Year2024
• ManufacturerManac
• Model NameFlatbed Highway
• Trim NameDurable Steel Extendable Drop Deck
• Generic Type (Primary)Flatbed
• DimensionsGooseneck: 12 1/4" high, 48" straight behind king pin | Openings: 5'-0" increments in closed position
• Length48' to 65' open or 53' to 72' open
• Width96"-102"
• HeightCoupler: 47"-50" | Drop: 20" located at 10'-6" from front
• Deck Height61" at front and 39" at rear
• Kingpin Setting18"
• Coupling5/16" steel plug welded structure
• ChassisCrossmembers: I beams, 4" @ 3.64 lbs/ft, 80 000 psi steel, 16" c/c in gooseneck and the remaining at 12" c/c| Side Rail: Formed channel 6" @ 4.6 lbs/ft.| Rub Rails: 3/8" x 2 1/2" shaped steel | Knee Braces: 2" x 2" x 3/16" angles, welded in web and to a crossmember, 4 located each side
• Electric
• ElectricalMain System: Grote Ultra Blue LED sealed lights & wiring harness system, meets Transport Canada and DOT requirements | Front Plug: 7 way (SAE J560)
• Lights and Safety
• LightingLED shock proof lights with polycarbonate CLEAR lenses
• SuspensionHendrickson HT or Intraax air ride
• Brakes
• Brake System Type16 1/2" x 7" extended life lining
• Hub Type10 stud disc, balanced drums, outboard mount
• ABS OptionWabco ABS 2S-1M
• Wheels & Tires
• WheelsOil or Grease
• Tires, Rear SpecificationContinental 22.5 radial
• FeaturesFlanges: Outside frame 3/8" x 6", 100 000 psi steel. Inside frame 3/4" x 6", 60 000 psi steel | Pockets: 3/16" steel plate, 1 5/8" x 3 5/8" interior, 4" high | | Rear End: 11" high, 9 gauge formed steel, including 3 boxes at rear and 3/8" x 2 1/2" shaped steel. | Bumper: CMVSS 223-RIG approved (in accordance with Canada & USA regulations). Uprights integrated with frames, 4" x 4" cross bar roll formed tubing | Fenders: Over tires at rear, checker plate 1/8" | Locks: Air operated with a third glad hand at front | Rollers: 4 total, 2 on outside sections of frame and 2 on interior sections | Landing Gear: Holland with reinforced structure | Air Controls: 3rd glad hand at front for easy opening and closing of exentable flatbed | Gladhands: Fixed at front | Paint: Shot blasted, one coat of epoxy primer and two polyurethane acrylic top coats | Decals: Conspicuity tape complies with DOT and CMVSS standards | Rims: Hub piloted steel, aluminum available | Mudflaps: Black rubber with Manac logo | Sliding Track: Full Length "LL" Extruded Aluminum Road Side or "C" shaped steel track | Front End: 9 gauge formed steel
• Construction MaterialWeb: 1/4" plate in king pin area and the remaining in 3/16" 80 000 psi steel. 24" high outside frame and 17 5/8" high on interior| Floor: Apitong or equivalent, 1 1/8" thick shiplap finished, no preservative