Utility Trailers of Washington

Specifications

• 2024 Manac Flatbed Highway Lightweight Steel Drop Deck
• Year2024
• ManufacturerManac
• Model NameFlatbed Highway
• Trim NameLightweight Steel Drop Deck
• Generic Type (Primary)Flatbed
• DimensionsGooseneck: 11 1/4" high, 48" straight behind king pin
• Length28'-53'
• Width96"-102"
• HeightCoupler: 47"-50"
• Deck Height59 1/2" at front and 54" at rear
• Kingpin Setting14"-42"
• Coupling1/4", 80,000 psi steel plug welded structure
• ChassisCrossmembers:I beams, 4" @ 3.2 lbs/ft, 80 000 psi steel, galvanized, 16" c/c | Side Rail: 4 3/8" x 5 11/16" high extruded aluminum "Legend model"| Rub Rails: Aluminum extrusion 3/8" x 2 3/4" with single pipe spool | Knee Braces: 3/16" galvanized formed steel plates bolted in web and crossmember each side
• Electric
• ElectricalMain System: Grote Ultra Blue LED sealed lights & wiring harness system, meets Transport Canada and DOT requirements | Front Plug: 7 way (SAE J560)
• Lights and Safety
• LightingLED shock proof lights with polycarbonate CLEAR lenses
• SuspensionHendrickson HT or Intraax air ride
• Brakes
• Brake System Type16 1/2" x 7" extended life lining
• Hub Type10 stud disc, balanced drums, outboard mount
• ABS OptionWabco ABS 2S-1M
• Wheels & Tires
• WheelsOil or Grease
• Tires, Rear SpecificationContinental 22.5 radial
• FeaturesFlanges: 3/8" x 5", 100 000 psi steel in gooseneck section and 1/2" x 5" high tensile in remainder| | Rear End: Galvanized formed steel | Bumper: CMVSS 223-RIG approved (in accordance with Canada & USA regulations). Uprights integrated with frames, 4" x 4" cross bar roll formed tubing | Locks: Air operated with a third glad hand at front | Rollers: 4 total, 2 on outside sections of frame and 2 on interior sections | Landing Gear: AXN (LG50DUN) | Air Controls: 3rd glad hand at front for easy opening and closing of exentable flatbed | Gladhands: Fixed at front | Paint: Shot blasted, one coat of epoxy primer and two polyurethane acrylic top coats | Decals: Conspicuity tape complies with DOT and CMVSS standards | Rims: Hub piloted steel, aluminum available | Mudflaps: Black rubber with Manac logo | Sliding Track: Full Length "LL" Extruded Aluminum Road Side or "C" shaped steel track | Front End: Bolted aluminum extrusion 7" high with bevelled corners | Lateral bracing: Between main beams, full length | Fenders: Reinforced over tires at rear, galvanized steel tubing structure
• Construction MaterialWeb: 1/4" plate in king pin area and the remaining in 3/16" 80 000 psi steel. 27" high at the peak with holes, parachute shaped, to lighten trailer| Floor: Apitong or equivalent, 1 1/8" thick shiplap finished, no preservative