Plug welded coupler plate structure with draining holes
Frame fully welded on both sides of web to flange
"Z' bracing between main beams
Steel structure completely shot blasted and painted
Photos
Highlights
Auburn, Washington
2024
Manac
Flatbed Highway Reliable Combo Extendable Flatbed
Crossmembers:I beams, 4" @ 3.64 lbs/ft, 80 000 psi steel, 16" c/c| Side Rail: Aluminum extrusion 3 3/4" x 5 13/16" high with integrated cargo rail | Rub Rails: Aluminum extrusion 3/8" x 2 3/4" with standard double pipe spools
Available
96"-102"
Coupler: 47"-50"
Specifications
2024
Manac
Flatbed Highway
Reliable Combo Extendable Flatbed
Flatbed
Gooseneck: 12" high, with integrated nose ramp and 48" straight behind king pin | Openings: 5'-0" increments in closed position
48' to 80' open or 53' to 90' open
96"-102"
Coupler: 47"-50"
61 1/4" high at front and 58" at rear
14"-42"
5/16" plug welded structure
Crossmembers:I beams, 4" @ 3.64 lbs/ft, 80 000 psi steel, 16" c/c| Side Rail: Aluminum extrusion 3 3/4" x 5 13/16" high with integrated cargo rail | Rub Rails: Aluminum extrusion 3/8" x 2 3/4" with standard double pipe spools
Main System: Grote Ultra Blue LED sealed lights & wiring harness system, meets Transport Canada and DOT requirements | Front Plug: 7 way (SAE J560)
LED shock proof lights with polycarbonate CLEAR lenses
Hendrickson HT or Intraax air ride
16 1/2" x 7" extended life lining
10 stud disc, balanced drums, outboard mount
Wabco ABS 2S-1M
Oil or Grease
Continental 22.5 radial
Flanges: Outside frame 3/8" x 6", 100 000 psi steel. Inside frame 3/4" x 6", 60 000 psi steel | | Rear End: Rear rail aluminum extrusion with small rubber dock bumper each corner | Bumper: CMVSS 223-RIG approved (in accordance with Canada & USA regulations). Galvanized (G164) steel, bolted uprights to frames, 4" x 4" cross bar roll formed tubing| Locks: Air operated with a third glad hand at front | Rollers: 4 total, 2 on outside sections of frame and 2 on interior sections | Landing Gear: AXN (LG50DUN) | Air Controls: 3rd glad hand at front for easy opening and closing of exentable flatbed | Gladhands: Fixed at front | Paint: Shot blasted, one coat of epoxy primer and two polyurethane acrylic top coats | Decals: Conspicuity tape complies with DOT and CMVSS standards | Rims: Hub piloted steel, aluminum available | Mudflaps: Black rubber with Manac logo | Sliding Track: Full Length "LL" Extruded Aluminum Road Side or "C" shaped steel track | Front End:Bolted aluminum extrusion 7" high with bevelled corners| Lateral bracing: Between main beams, full length | Pockets: Aluminum tube, 3 5/8" x 1 5/8" inside, 4" high on 24" centers with certified 5,500 lbs working load limit |
Web: 1/4" plate in king pin area and the remaining in 3/16" 80 000 psi steel. 24" high outside frame and 17 5/8" high on interior| Floor: High Strength 1 1/8 high inverted "T" structural aluminum extrusion with 4 apitong nailers
