Information
2024 Manac Refrigerated Vans Energy-Efficient
Features may include:- XPS extuded polystyrene block foam insulation
- Continuous composite wall construction
- Non-hygroscopic insulation
- Sandwich design technology
Highlights
- Auburn, Washington
- 2024
- Manac
- Refrigerated Vans Energy-Efficient
- Crossmembers: 4" I-beams with pre-drilled holes for fuel tank lines | Bottom Rail: 9" High Aluminum Extrusion
- Available
- 102"
- Coupler: 47"-49"
Specifications
- 2024
- Manac
- Refrigerated Vans
- Energy-Efficient
- Refrigerated
- 28'-53'
- 102"
- Coupler: 47"-49"
- 18"-48"
- High strength 1/4", 5/16" or 3/8"
- Crossmembers: 4" I-beams with pre-drilled holes for fuel tank lines | Bottom Rail: 9" High Aluminum Extrusion
- Main System: Grote Ultra Blue LED sealed lights & wiring harness system meets Transport Canada and DOT requirements | Front Plug: 7 way (SAE J560)
- LED shock proof lights with polycarbonate lenses
- Hendrickson Intraax air ride
- 16 1/2" x 7" extended life lining
- 10 stud disc, balanced drums, outboard mount
- Wabco ABS 2S-1M
- Oil or Grease
- Continental 22.5 radial tires
- Front Wall: 6 Post Design, Pre-painted aluminum panel, aluminum cast radius with interchangeable corner caps | Interior Liner: ArmorTuf-ERMI, .075" thick | Front Wall Reefer/Heater: Prep Frame and bolts installed | Front Wall Insulation: 4" thick XPS Extuded Polystyrene | Side Panels: .049" Prepainted White Aluminum Panels | Posts: 25 mm, C-shaped, 12", 16" or 24" c/c | Interior Liner: ArmorTuf-ERMI, .075" thick | Side Wall: Insulation 2" thick XPS Extruded Polystyrene | Door Frame: Galvanized (G164) | Rear Header: Integratted marker light protection and gutter | Doors: Insulated composite swing with multi-lip interior seal or insulated roll-up | Bumper: Galvanized (G164), bolted uprights CMVSS & DOT approved and IIHS Toughguard award design | Rear Sill: Galvanized with tailight protection and integrated gusset design for superior dock energy absorbption |Front : 4" thick XPS extruded polystyrene | Sides: 2" thick XPS extruded polystyrene | Doors Insulation: 2 1/2" thick XPS extruded polystyrene | Landing Gear: Holland 2 Speed | Structure: Galvanized formed steel over 6 crossmembers | Rims: Hub piloted steel, aluminum available | Mudflaps: Black rubber with Manac logo | Gladhands: Fixed at front | Decals: Conspicuity tape complies with DOT and CMVSS standards
- Insulation: 2 1/2" thick XPS extruded polystyrene | liner: ArmorTuf ERMI liner, .075" thick
- Floor: Aluminum, flat type, inverted "T", 1 5/16" thick. fully welded and installed over plastic furrings. | Insulation: 2 1/2" thick XPS extruded polystyrene
- Aluminum | Bows: Aluminum I-shaped on 32" centers | Insulation: 3" thick XPS extruded polystyrene | Liner: ArmorTuf-ERMI liner, .075" thick | Roof Insulation: 3" thick XPS extruded polystyrene
